аЯрЁБс>ўџ ўџџџўџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџRoot EntryџџџџџџџџГ;)q—ЮЎpЄ„А'UагUэЫўџџџContentsџџџџџџџџџџџџ2ф[џџџџџџџџџџџџџџџџџџџџџџџџўџџџ§џџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџ3456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ўџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџRoot EntryџџџџџџџџГ;)q—ЮЎpЄ„А'@$n+VэЫўџџџContentsџџџџџџџџџџџџО\џџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџўџџџ§џџџ  !"#$%&'()*+,-./01`џџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџўџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџ4Vxd main00c   iPqmm р іrq tt„ %AI0398 > 0 nn p € 0  @  ty јџp їџ €y Яџ  Пџ  y‡ ADC2 ADC4р|"y"‡ ADC1 THM1р"Ÿ%|'y'‡ DAC0 DAC1р' +y+%AI0398 = 894519620+Ё/y/%AI0398 = 942944563/Ђ3y3%AI0398 = 8432684203Ѓ77 9t9{9‚%AI0398 != 8945196209s==%AI0398 = 809713988= љ№??%AI0398 = 826491204? њ№CC%AI0398 = 826491969C ћ№EE%AI0398 = 860046401E ћ№GG%AI0398 = 843269185G ќ№II%AI0398 = 876823617I ќ№MM%AI0398 = 826561618M §№PP%AI0398 = 827148372P ў№SS%AI0398 = 843925588S џ№VV%AI0398 = 942944563V №YY%AI0398 = 894519620Y №\\%AI0398 = 843268420\ №_y_ ѕbzb ѕee %AI0379 > 1 egg E  """##$$%&'*+./23679;<=?BCEGILMOPRSUVXY[\^_abdegiC[[ Smartmod Modbus I/O Parameter Configuration Utility. V1.05 ]]71.05 adds the ability to change/correct the input type.ПThis program is provided as convenience for the user/programmer to configure and operate Smartmod I/O units. However, it is not required for configuring and operating Smartmod I/O units. ЩThis program can be incorporated into existing programs. Care must be taken to avoid address conflicts. Screens for this utility start at 501. "OR Around Function Block" must be checked for 'allow'.џThis program uses the Downloadable Modbus Protocol. Port MJ2 is automatically opened for communication by the downloaded protocol. The Port Open/Close and Modbus Master ladder functioins are not used with the Downloadable Modbus Protocol. The port parameters are configured for the out of box default settings of the Smartmod I/O units. For new Smartmod units, DO NOT JUMPER INIT to GND on the Smartmod RS-485 port. If port parameters are desired other than what the unit is currently configured for, the parameters of the Smartmod I/O are changed first through this config routine and then the port parameters in the Protocol Config are changed to match. џ}[[ Important!! ]] When node ID and/or port parameters of the Smartmod unit are changed through this utility, communication will be lost when the Smartmod unit is power cycled if parameters are not changed to match in the controller. Open the Protocol Config in Cscape and change the Network Settings to match the changes made and download the project file to the controller.џgIf communication cannot be established, install the INIT to GND jumper on the RS485 port of the Smartmod unit and cycle the power to the Smartmod unit. With the jumper installed, the parameters of the Smartmod unit will be: 9600, 8, n, 1 and node ID 1. Protocol Config Network parameters will need to be changed to match and downloaded to the controller. ЯInit Default Setup: 1. Install jumper between INIT and GND terminals of the RS-485 port. 2. Apply power to Smartmod unit. 3. Read parameter words to see current parameters. 4. Write changes if necessary.9Retrieve 1st 10 addresses of Smartmod units. All models.q The AND functions split up the port parameter word in order to make it editable from text tables in the screens.ЄBitwise operations reconstruct the port parameter word from the above section. Node ID, Rx/Tx delay, WD timer, and Channel enable are edited directly from screens.iWrite parameters to; ADC107, ADC207, ADC120, ADC220, THM100, THM200, RTD100. 7 configurable words.&?  @џџџџџџџџ Tags5F1_KEYF2_KEYF3_KEYF4_KEYF5_KEYF6_KEYF7_KEYF8_KEYF9_KEYF10_KEYF11_KEYF12_KEYFST_SCNNET_OKT_10MST_100MST_SECIO_OKALW_ONALW_OFF PAUSING_SCN RESUMED_SCN NET_IO_OKUSER_SCRALRM_SCRSYS_SCRSELF_TSTNET_IDRTC_SECRTC_MINRTC_HOURRTC_DATERTC_MONRTC_YEARRTC_DAYLAST_KEY USER_LEDS ALM_UNACKALM_ACTSYS_BEEP USER_BEEPNET_USE NET_TX_USELED_1LED_2LED_3LED_4LED_5LED_6LED_7LED_8LED_9LED_10555   0@аРар№ € P ` p € А р  ЁЂЃЄЅІЇЈЉ55PLC Type§Text ScreenText Tables 1200240048009600192003840078MarkEven Odd0NoneASCII_Mode@RTU_Mode Not ConnectedDAC0HE359DAC007DAC1HE359DAC107ADC1HE359ADC107RTD1HE359RTD100THM1HE359THM100DAC2HE359DAC201ADC2HE359ADC207THM2HE359THM200ADC3HE359ADC120ADC4HE359ADC220DIQ5HE359DIQ5123148HE359DIM6100-2K Ohm0-500 OhmPt-100Ni-100Pt-1000Ni-1000DisabledEnabled0-20mA0-10V None Selected+/- 50 mV+/- 100mV+/- 250mV+/- 1000mVT/C JT/C KT/C TT/C ET/C RT/C ST/C BT/C N OFFON No ErrorTimeout‚Bad CRCƒInvalid MssgџџWatch WindowNetworkAuxI/O Config`#І@€џџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџSecuritySetpointsGraphics@1E €єџџџџџџџџџџ   РРРРРРРРРРРРSmartmod I/O Config $џџџџO џџџџџџq  SetupџInternal registersџџџџџџџџџџ OnOFF џџџџ s‚~ џџџџџџP  џџVersion!@^Internal registersџџџџџџџџџџ { џџџџџџ   Smartmod Setup$џInternal registersџџџџџџџ˜КмўModbus ParametersOperation Settings7408:7:%AI0463Save Parameters 520:12:520Exit Without Save 501:12:501˜Кмў Modbus ID%AI040116 Bitsџ Baud Rate%AI047116 Bits Data Bits%AI047216 BitsParity%AI047316 BitsMode%AI047416 Bits  Rx/Tx Delay%AI040216 BitsџPress ESC to Exit  џџџџџџр Internal registersџџџџџџџ џџџџџџџџџ p џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜Кмў Output SelectWatchdog %AI0404.11 BitWatchdog Timer%AI040316 BitsџBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501˜КмўOut 0 %AI0408.11 BitOut 1 %AI0408.21 BitPress ESC to Exit  џџџџџџр Internal registersџџџџџџџ џџџ  џџџџџџр Internal registersџџџџџџџ  o џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜Кмў Output SelectWatchdog %AI0404.11 BitWatchdog Timer%AI040316 BitsџBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501˜КмўOut 0 %AI0408.11 BitOut 1 %AI0408.21 BitOut 2 %AI0408.31 BitOut 3 %AI0408.41 BitPress ESC to Exitџџџ  џџџџџџр Internal registersџџџџџџџ  p џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜Кмў Input Select Input Type%AI40516 BitscWatchdog %AI0404.11 BitWatchdog Timer%AI040316 BitsџBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501˜КмўInput 0 %AI0406.11 BitInput 1 %AI0406.21 BitInput 2 %AI0406.31 BitInput 3 %AI0406.41 Bitџџџ  џџџџџџр Internal registersџџџџџџџ  p џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜Кмў Input Select Input Type%AI40516 BitscWatchdog %AI0404.11 BitWatchdog Timer%AI040316 BitsџBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501˜Кмў Input 0 %AI0406.11 BitInput 1 %AI0406.21 BitInput 2 %AI0406.31 BitInput 3 %AI0406.41 BitInput 4 %AI0406.51 BitInput 5 %AI0406.61 BitInput 6 %AI0406.71 BitInput 7 %AI0406.81 BitPress ESC to Exitџџџ  џџџџџџр Internal registersџџџџџџџ  p џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜КмўTypeai40516 Bits  Input EnableWatchdog %AI0404.11 BitWatchdog Timer%AI040316 BitsџBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501˜КмўInput 0ai406.11 BitInput 1ai406.21 BitInput 2 %AI0406.31 BitInput 3 %AI0406.41 BitPress ESC to Exitџџџ  џџџџџџр Internal registersџџџџџџџ  p џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜КмўTypeai40516 Bits  Input EnableWatchdog %AI0404.11 BitWatchdog Timer%AI040316 BitsџBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501˜КмўInput 0ai406.11 BitInput 1ai406.21 BitInput 2 %AI0406.31 BitInput 3 %AI0406.41 BitPress ESC to Exitџџџ  џџџџџџр Internal registersџџџџџџџ  p џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜КмўTypeai40516 Bits  Input EnableWatchdog %AI0404.11 BitWatchdog Timer%AI040316 BitsџBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501˜Кмў Input 0ai406.11 BitInput 1ai406.21 BitInput 2 %AI0406.31 BitInput 3 %AI0406.41 BitInput 4 %AI0406.51 BitInput 5 %AI0406.61 BitInput 6 %AI0406.71 BitInput 7 %AI0406.81 BitPress ESC to Exitџџџ  џџџџџџр Internal registersџџџџџџџ  p џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜КмўWatchdog %AI0404.91 BitWatchdog Timer%AI040316 BitsџBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501џџџ  џџџџџџр Internal registersџџџџџџџ  p џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜КмўWatchdogai405.91 Bit Watchdog Timeai40716 BitsџSafe Output ValuePower Up ValueBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501˜КмўOut 0AI406.11 Bit Out 1 %AI0406.21 Bit Out 2 %AI0406.31 Bit Out 3 %AI0406.41 Bit Press ESC to Exit˜КмўOut 0 %AI0406.91 Bit Out 1 %AI0406.101 Bit Out 2 %AI0406.111 Bit Out 3 %AI0406.121 Bit Press ESC to Exitџџџ  џџџџџџр Internal registersџџџџџџџ  p џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜КмўWatchdog %AI0404.11 BitWatchdog Timer%AI040316 BitsџBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501џџџџџџџџџџџџџџџ  U= џџџџџџА џџError Status!Internal registersџџџџџџџ} џџџџџџА дс Internal registersџџџџџџџ  l!ŠA џџџџџџ ѕџ ESCџInternal registersџџџџџџџ TZџџџC‹p џџџџџџz  Cancel & Exit џInternal registersџџџџџџџџџџ OnOFF џџџџ‹< џџџџџџy  Save Parameters & ExitџInternal registersџџџџџџџџџџ OnOFF џџџџџџџ џџџџџџџџџџџўџ џрѕ џрѕ џрѕ џрѕ Їџџџџ Wdш WSmartmodаXq7 №Xž7№XŸ7 №X 7№XЁ7№XЂ7pYr7 аX џџџџџџџџMessagingnI…b2шEAILDataLoggingGOLNTim Brant Horner APG."Smartmod I/O configuration utilityTue Jan 16 2007 11:38:55 AMMon Mar 28 2011 10:38:39 AMPlease read4Vxd main00a q mm р іrq tt„ %AI0398 > 0 nn p € 0  @  ty јџp їџ €y Яџ  Пџ  y‡ ADC2 ADC4р| y ‡ ADC1 THM1р Ÿ#|%y%‡ DAC0 DAC1р% )y)%AI0398 = 894519620)Ё-y-%AI0398 = 942944563-Ђ1y1%AI0398 = 8432684201Ѓ55 7t7{7‚%AI0398 != 8945196207s;;%AI0398 = 809713988; љ№==%AI0398 = 826491204= њ№AA%AI0398 = 826491969A ћ№CC%AI0398 = 860046401C ћ№EE%AI0398 = 843269185E ќ№GG%AI0398 = 876823617G ќ№KK%AI0398 = 826561618K §№NN%AI0398 = 827148372N ў№QQ%AI0398 = 843925588Q џ№TT%AI0398 = 942944563T №WW%AI0398 = 894519620W №ZZ%AI0398 = 843268420Z №]y] ѕ`z` ѕcc %AI0379 > 1 cee D      !!""#$%(),-014579:;=@ACEGJKMNPQSTVWYZ\]_`bcegC[[ Smartmod Modbus I/O Parameter Configuration Utility. V1.05 ]]71.05 adds the ability to change/correct the input type.ПThis program is provided as convenience for the user/programmer to configure and operate Smartmod I/O units. However, it is not required for configuring and operating Smartmod I/O units. ЩThis program can be incorporated into existing programs. Care must be taken to avoid address conflicts. Screens for this utility start at 501. "OR Around Function Block" must be checked for 'allow'.џThis program uses the Downloadable Modbus Protocol. Port MJ2 is automatically opened for communication by the downloaded protocol. The Port Open/Close and Modbus Master ladder functioins are not used with the Downloadable Modbus Protocol. The port parameters are configured for the out of box default settings of the Smartmod I/O units. For new Smartmod units, DO NOT JUMPER INIT to GND on the Smartmod RS-485 port. If port parameters are desired other than what the unit is currently configured for, the parameters of the Smartmod I/O are changed first through this config routine and then the port parameters in the Protocol Config are changed to match. џ}[[ Important!! ]] When node ID and/or port parameters of the Smartmod unit are changed through this utility, communication will be lost when the Smartmod unit is power cycled if parameters are not changed to match in the controller. Open the Protocol Config in Cscape and change the Network Settings to match the changes made and download the project file to the controller.џgIf communication cannot be established, install the INIT to GND jumper on the RS485 port of the Smartmod unit and cycle the power to the Smartmod unit. With the jumper installed, the parameters of the Smartmod unit will be: 9600, 8, n, 1 and node ID 1. Protocol Config Network parameters will need to be changed to match and downloaded to the controller. ЯInit Default Setup: 1. Install jumper between INIT and GND terminals of the RS-485 port. 2. Apply power to Smartmod unit. 3. Read parameter words to see current parameters. 4. Write changes if necessary. 9Retrieve 1st 10 addresses of Smartmod units. All models.q The AND functions split up the port parameter word in order to make it editable from text tables in the screens.ЄBitwise operations reconstruct the port parameter word from the above section. Node ID, Rx/Tx delay, WD timer, and Channel enable are edited directly from screens.iWrite parameters to; ADC107, ADC207, ADC120, ADC220, THM100, THM200, RTD100. 7 configurable words.$?  @џџџџџџџџ Tags5F1_KEYF2_KEYF3_KEYF4_KEYF5_KEYF6_KEYF7_KEYF8_KEYF9_KEYF10_KEYF11_KEYF12_KEYFST_SCNNET_OKT_10MST_100MST_SECIO_OKALW_ONALW_OFF PAUSING_SCN RESUMED_SCN NET_IO_OKUSER_SCRALRM_SCRSYS_SCRSELF_TSTNET_IDRTC_SECRTC_MINRTC_HOURRTC_DATERTC_MONRTC_YEARRTC_DAYLAST_KEY USER_LEDS ALM_UNACKALM_ACTSYS_BEEP USER_BEEPNET_USE NET_TX_USELED_1LED_2LED_3LED_4LED_5LED_6LED_7LED_8LED_9LED_10555   0@аРар№ € P ` p € А р  ЁЂЃЄЅІЇЈЉ55PLC Type§Text ScreenText Tables 1200240048009600192003840078MarkEven Odd0NoneASCII_Mode@RTU_Mode Not ConnectedDAC0HE359DAC007DAC1HE359DAC107ADC1HE359ADC107RTD1HE359RTD100THM1HE359THM100DAC2HE359DAC201ADC2HE359ADC207THM2HE359THM200ADC3HE359ADC120ADC4HE359ADC220DIQ5HE359DIQ5123148HE359DIM6100-2K Ohm0-500 OhmPt-100Ni-100Pt-1000Ni-1000DisabledEnabled0-20mA0-10V None Selected+/- 50 mV+/- 100mV+/- 250mV+/- 1000mVT/C JT/C KT/C TT/C ET/C RT/C ST/C BT/C N OFFON No ErrorTimeout‚Bad CRCƒInvalid MssgџџWatch WindowNetworkAuxI/O Config`#І@€џџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџџSecuritySetpointsGraphicsІ0E €єџџџџџџџџџџ   РРРРРРРРРРРРSmartmod I/O Config $џџџџO џџџџџџq  SetupџInternal registersџџџџџџџџџџ OnOFF џџџџџџџ { џџџџџџ   Smartmod Setup$џInternal registersџџџџџџџ˜КмўModbus ParametersOperation Settings7408:7:%AI0463Save Parameters 520:12:520Exit Without Save 501:12:501˜Кмў Modbus ID%AI040116 Bitsџ Baud Rate%AI047116 Bits Data Bits%AI047216 BitsParity%AI047316 BitsMode%AI047416 Bits  Rx/Tx Delay%AI040216 BitsџPress ESC to Exit  џџџџџџр Internal registersџџџџџџџ џџџџџџџџџ p џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜Кмў Output SelectWatchdog %AI0404.11 BitWatchdog Timer%AI040316 BitsџBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501˜КмўOut 0 %AI0408.11 BitOut 1 %AI0408.21 BitPress ESC to Exit  џџџџџџр Internal registersџџџџџџџ џџџ  џџџџџџр Internal registersџџџџџџџ  o џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜Кмў Output SelectWatchdog %AI0404.11 BitWatchdog Timer%AI040316 BitsџBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501˜КмўOut 0 %AI0408.11 BitOut 1 %AI0408.21 BitOut 2 %AI0408.31 BitOut 3 %AI0408.41 BitPress ESC to Exitџџџ  џџџџџџр Internal registersџџџџџџџ  p џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜Кмў Input Select Input Type%AI40516 BitscWatchdog %AI0404.11 BitWatchdog Timer%AI040316 BitsџBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501˜КмўInput 0 %AI0406.11 BitInput 1 %AI0406.21 BitInput 2 %AI0406.31 BitInput 3 %AI0406.41 Bitџџџ  џџџџџџр Internal registersџџџџџџџ  p џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜Кмў Input Select Input Type%AI40516 BitscWatchdog %AI0404.11 BitWatchdog Timer%AI040316 BitsџBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501˜Кмў Input 0 %AI0406.11 BitInput 1 %AI0406.21 BitInput 2 %AI0406.31 BitInput 3 %AI0406.41 BitInput 4 %AI0406.51 BitInput 5 %AI0406.61 BitInput 6 %AI0406.71 BitInput 7 %AI0406.81 BitPress ESC to Exitџџџ  џџџџџџр Internal registersџџџџџџџ  p џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜КмўTypeai40516 Bits  Input EnableWatchdog %AI0404.11 BitWatchdog Timer%AI040316 BitsџBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501˜КмўInput 0ai406.11 BitInput 1ai406.21 BitInput 2 %AI0406.31 BitInput 3 %AI0406.41 BitPress ESC to Exitџџџ  џџџџџџр Internal registersџџџџџџџ  p џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜КмўTypeai40516 Bits  Input EnableWatchdog %AI0404.11 BitWatchdog Timer%AI040316 BitsџBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501˜КмўInput 0ai406.11 BitInput 1ai406.21 BitInput 2 %AI0406.31 BitInput 3 %AI0406.41 BitPress ESC to Exitџџџ  џџџџџџр Internal registersџџџџџџџ  p џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜КмўTypeai40516 Bits  Input EnableWatchdog %AI0404.11 BitWatchdog Timer%AI040316 BitsџBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501˜Кмў Input 0ai406.11 BitInput 1ai406.21 BitInput 2 %AI0406.31 BitInput 3 %AI0406.41 BitInput 4 %AI0406.51 BitInput 5 %AI0406.61 BitInput 6 %AI0406.71 BitInput 7 %AI0406.81 BitPress ESC to Exitџџџ  џџџџџџр Internal registersџџџџџџџ  p џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜КмўWatchdog %AI0404.91 BitWatchdog Timer%AI040316 BitsџBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501џџџ  џџџџџџр Internal registersџџџџџџџ  p џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜КмўWatchdogai405.91 Bit Watchdog Timeai40716 BitsџSafe Output ValuePower Up ValueBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501˜КмўOut 0AI406.11 Bit Out 1 %AI0406.21 Bit Out 2 %AI0406.31 Bit Out 3 %AI0406.41 Bit Press ESC to Exit˜КмўOut 0 %AI0406.91 Bit Out 1 %AI0406.101 Bit Out 2 %AI0406.111 Bit Out 3 %AI0406.121 Bit Press ESC to Exitџџџ  џџџџџџр Internal registersџџџџџџџ  p џџџџџџ   Operation Settings$џInternal registersџџџџџџџ˜КмўWatchdog %AI0404.11 BitWatchdog Timer%AI040316 BitsџBack 502:12:502Save Parameters 520:12:520Exit Without Save 501:12:501џџџџџџџџџџџџџџџ  U= џџџџџџА џџError Status!Internal registersџџџџџџџ} џџџџџџА дс Internal registersџџџџџџџ  l!ŠA џџџџџџ ѕџ ESCџInternal registersџџџџџџџ TZџџџC‹p џџџџџџz  Cancel & Exit џInternal registersџџџџџџџџџџ OnOFF џџџџ‹< џџџџџџy  Save Parameters & ExitџInternal registersџџџџџџџџџџ OnOFF џџџџџџџ џџџџџџџџџџџўџ џрѕ џрѕ џрѕ џрѕ Їџџџџ Wdш WSmartmodаXq7 №Xž7№XŸ7 №X 7№XЁ7№XЂ7pYr7 аX џџџџџџџџMessagingnI…b2шEAILDataLoggingGOLNTim Brant Horner APG."Smartmod I/O configuration utilityTue Jan 16 2007 11:38:55 AMMon Mar 28 2011 10:33:21 AMPlease read comments carefully.(Window State Schema:02:Module Name:main:Devicenet Scanner Data Can Open DataRecipes џџџџReports,MQBP џўџ' comments carefully.(Window State Schema:02:Module Name:main:Devicenet Scanner Data Can Open DataRecipes џџџџReports,MQBP џўџ'